C2-160 PCI/ISA Card Down Converter is based on TV One’s exclusive CORIO2™ technology and provides high quality scan conversion from Computer or HDTV signals to standard video formats in a compact package. It handles virtually any computer resolution up to 2048x2048 at any vertical refresh rate and all HDTV resolutions up to 1080p. In order to deal with PC signals, a wide variety of computer signal formats can be accommodated. Video outputs are switchable between NTSC and PAL and are simultaneously provided in Composite and S-Video. A PC loop-through is also provided.

Our exclusive AutoSet® feature takes the hassle out of setup by automatically sizing and positioning the computer image to fit exactly on the video screen. All settings can be stored in non-volatile memory and are retained even when power is switched off. All the functions can be controlled via an optional Infrared Control Remote Unit or via an RS-232 connection. A Windows Control Panel is provided and most third party control systems interface directly with the entire C2 range of products. An On-Screen Display is available to assist in setup.

Variable Zoom to 10X allows you to enlarge any part of the computer screen to fill the entire video screen and position controls allow you to move around to any area desired. Variable Shrink to as little as 10% allows fitting the image onto most displays. The advanced Digital Flicker Elimination circuitry and high sampling rate insures crisp, clear images, while full bandwidth chroma sampling insures faithfully reproduced, high resolution colours. The C2-160 plugs into a vacant slot inside a PC and receives its power from a standard Hard Drive connector within the PC.

The C2-160 also features a wide variety of additional capabilities, such as Genlock, Chromakey and Lumakey. The Key Mode allows computer graphics to be keyed over an external Composite or S-Video signal. The keyed image may be faded in and out. Due to the 4:4:4 sampling format, precise keying at the pixel level can be achieved. The Mix Mode permits glitch-free mixing between the computer image and external video. The PIP Mode allows the computer input to be inset in a window over either of the video inputs.

Features:

• Automatic incoming resolution detection
  
• Computer Input/Outputs
  
• Computer Resolutions to 2048x2048
  
• HDTV Resolutions to 1080p
  
• AutoSet® - Automatic picture sizing
  
• Multiple Worldwide Television Standards
  
• Composite and S-Video Inputs/Outputs
  
• RS-232 Interface and Windows Control Panel
  
• Variable Image Zoom to 10X and Shrink to 10%
  
• Genlock with Subcarrier Phase Adjustment
  
• Chromakey and Lumakey
  
• Mix and PIP

CC-300 CORIOconsole provides a Video Production Switcher type interface for the C2 series Video Processors. Two rows of 14 buttons are provided for Preview and Program functionality of mixed format sources. Fades and wipes may be either automatic with preset times or manually controlled via the fader bar. The joystick employs full range of motion to allow precise positioning of P-I-P inserts and other functions. The Integrated LCD touch screen plus fixed-purpose function keys combine with “soft” function keys to provide total control over multiple C2 series units. The CC-300 provides access to all controls with a minimum of keystrokes.

Unleash the Power –The CC-300 is designed to work with any CORIO2 product. In fact, a single CC-300 can control multiple CORIO2 devices. When used with a C2-7000 series unit, it provides all the functionality of a multi-format video switcher, complete with an independent preview channel. Freely mix between analog and digital signals in either video or computer formats.

Flexibility -The CC-300 has a natural front to back slope, so it can be easily used on a desktop. It also comes with rack mounting hardware for installation in a standard 19” rack. Interface between the CC-300 and the C2 series device is via RS-232 or Ethernet with IP protocol. When the unit is powered up, it automatically polls and identifies any devices connected, such as C2 units or Calypso machine control units. The LCD and button illumination is adjustable, so they can be dimmed for easier viewing when working in darkened rooms.

Machine Control - This option allows control of external devices directly from the CC-300 console’s touch screen LCD panel. These devices can be virtually anything that can be remote controlled by RS-232, RS-422, Ethernet, Infrared or GPI trigger, such as projectors, screens, lighting, recording or playback devices. The CC-300 interfaces directly to the Calypso Pro I/O or ION series.

See Adobe Acrobat pdf datasheet (left) for more information.

C2-2100 Series Down Converter is based on TV One’s exclusive CORIO2™ technology and provides high quality scan conversion from DVI or Analog Computer or HDTV signals to standard video formats. It handles any computer resolution up to 2048x2048 at any vertical refresh rate and all HDTV resolutions up to 1080p. In order to deal with PC, Mac and most Computer Workstation signals, a wide variety of computer signal formats can be accommodated. Video outputs are switchable between NTSC and PAL and are simultaneously provided in Composite, S-Video and YUV Component. Alternatively, the output can be YPbPr Component (Progressive Scan). A PC loop-through is also provided. C2-2105 provides an SDI output as well.

Our exclusive AutoSet® feature takes the hassle out of setup by automatically sizing and positioning the computer image to fit exactly on the video screen. All settings are stored in non-volatile memory and are retained even when power is switched off. All the functions can be controlled via the front panel Push Buttons, an Infrared Control Remote Unit or via an RS-232 or IP connection. A Windows Control Panel is provided and most third party control systems interface directly with the entire C2 range of products. A front panel LCD makes setup easy.

Variable Zoom to 10X allows you to enlarge any part of the computer screen to fill the entire video screen and position controls allow you to move around to any area desired. Variable Shrink to as little as 10% allows fitting the image onto most displays. The advanced Digital Flicker Elimination circuitry and high sampling rate insures crisp, clear images, while full bandwidth chroma sampling insures faithfully reproduced, high resolution colours. C2-2000 series units are housed in desktop cases and rackmount kits are available as options.
The Genlock feature insures precise synchronisation of the incoming signals by providing a wide Subcarrier lock range with Subcarrier phase adjustment.

C2-2150 Down Converter PLUS has all the functions and features of the C2-2100 and adds a wide variety of additional capabilities, such as Picture-In-Picture, Chromakey, Lumakey and Mix. The Key Mode allows computer graphics to be keyed over an external Composite or S-Video signal. The keyed image may be faded in and out. Due to the 4:4:4 sampling format, precise keying at the pixel level can be achieved. The Mix Mode permits glitch-free mixing between the computer image and external video. The PIP Mode allows either of the computer inputs to be inset in a window over either of the video inputs or visa versa. The C2-2155 provides an SDI output as well.

Features of the C2-2100,C2-2105:

• Automatic incoming resolution detection
  
• Analog Computer Input via HD-15 w/Loop-through
  
• DVI-D Computer Input via DVI-I Connector
  
• Genlock with Subcarrier Phase Adjustment
  
• Computer Resolutions to 2048x2048
  
• HDTV Resolutions to 1080p
  
• AutoSet™ - Automatic picture sizing
  
• Multiple Worldwide Television Standards
  
• Composite, S-Video, YUV, YPbPr Outputs
  
• SDI Output (C2-2105 only)
  
• RS-232 & IP Interface and Windows Control Panel
  
• IR Remote Control
  
• Variable Image Zoom to 10X and Shrink to 10%
  
• Optional Single/Dual Rackmount Kit
  
• Optional Input Expansion for additional inputs

• Picture-in-Picture
  
• Chromakey and Lumakey
  
• Composite and S-Video Input
  
• SDI Out (C2-2155 only)

C2-1100 Down Converter is based on TV One’s exclusive CORIO2™ technology and provides high quality scan conversion from Computer or HDTV signals to standard video formats. It handles any computer resolution up to 2048x2048 at any vertical refresh rate and all HDTV resolutions up to 1080p. In order to deal with PC, Mac and most Computer Workstation signals, a wide variety of computer signal formats can be accommodated. Video outputs are switchable between NTSC and PAL and are simultaneously provided in Composite, S-Video and YUV Component. Alternatively, the output can be YPbPr Component (Progressive Scan). A PC loop-through is also provided.

Our exclusive AutoSet® feature takes the hassle out of setup by automatically sizing and positioning the computer image to fit exactly on the video screen. All settings are stored in non-volatile memory and are retained even when power is switched off. All the functions can be controlled via the front panel Push Buttons, an Infrared Control Remote Unit or via an RS-232 connection. A Windows Control Panel is provided and most third party control systems interface directly with the entire C2 range of products. An On-Screen Display is available to assist in setup.

Variable Zoom to 10X allows you to enlarge any part of the computer screen to fill the entire video screen and position controls allow you to move around to any area desired. Variable Shrink to as little as 10% allows fitting the image onto most displays. The advanced Digital Flicker Elimination circuitry and high sampling rate insures crisp, clear images, while full bandwidth chroma sampling insures faithfully reproduced, high resolution colours. The C2-1100 is housed in a desktop case and a rackmount kit is available as an option.

C2-1150 Down Converter PLUS has all the functions and features of the C2-1100 and adds a wide variety of additional capabilities, such as Genlock, Picture-In-Picture, Chromakey and Lumakey. The Key Mode allows computer graphics to be keyed over an external Composite or S-Video signal. The keyed image may be faded in and out. Due to the 4:4:4 sampling format, precise keying at the pixel level can be achieved. The Mix Mode permits glitch-free mixing between the computer image and external video. The PIP Mode allows either of the computer inputs to be inset in a window over either of the video inputs or visa versa.

Features:

• Automatic incoming resolution detection
  
• 2x Computer Inputs via HD-15 and 5-BNC
  
• Computer Resolutions to 2048x2048
  
• HDTV Resolutions to 1080p
  
• AutoSet® - Automatic picture sizing
  
• Multiple Worldwide Television Standards
  
• Composite, S-Video, YUV, YPbPr Outputs
  
• RS-232 Interface and Windows Control Panel
  
• IR Remote Control
  
• Variable Image Zoom to 10X and Shrink to 10%
  
• Optional Single/Dual Rackmount Kit
  
• Optional Input Expansion for additional inputs

• Genlock with Subcarrier Phase Adjustment
  
• Picture-in-Picture
  
• Chromakey and Lumakey
  
• Composite and S-Video Input

C2-2200 Video Switcher/Scaler is based on TV One’s exclusive CORIO2™ technology and provides high scaling to Analogue or DVI Computer or HDTV signals. NTSC and PAL video standards are supported. Video Inputs are 2x Composite, 2x S-Video and 1x YUV Component or YPbPr. A computer bypass is also provided. RGB/YPbPr Scaling permits the computer input signals to be scaled with the same flexibility as the video inputs. The output is selectable as any computer resolution up to 2048x2048 at any vertical refresh rate and all HDTV resolutions up to 1080p. A wide variety of computer signal formats are available to support PC, Mac and Workstation formats. C2-2205
All the functions can be controlled via the front panel Push Buttons, an Infrared Control Remote Unit or via an RS-232 or IP connection. A Windows Control Panel is provided and most third party control systems interface directly with the entire C2 range of products. A front panel LCD makes setup easy.

Variable Zoom to 10X allows you to enlarge any part of the video image to fill the entire computer screen and position controls allow you to move around to any area desired. Variable Shrink to as little as 10% allows fitting the image onto most displays. The advanced Digital Flicker Elimination circuitry and high sampling rate insures crisp, clear images, while full bandwidth chroma sampling insures faithfully reproduced, high res colours.

Stereo Audio switching is provided by an integral 4x1 audio routing switcher. The four impedance-independent unbalanced inputs follow the video input selection. A rear panel terminal block provides access.

C2-2250 Video Scaler PLUS has all the functions and features of the C2-2200 and adds a wide variety of additional capabilities, such as Picture-In-Picture, Chromakey, Lumakey and Mixing. The Key Mode allows computer graphics to be keyed over an external Composite or S-Video signal. The keyed image may be faded in and out. Due to the 4:4:4 sampling format, precise keying at the pixel level can be achieved. The Mix Mode permits glitch-free mixing between the computer image and external video. The PIP Mode allows either of the computer inputs to be inset in a window over either of the video inputs or visa versa. The C2-2255 provides an SDI input as well.

Features:

• Automatic incoming resolution detection
  
• Analogue Computer Input via HD-15 Connector
  
• DVI-D Computer Input via DVI-I Connector
  
• Inputs: 2x CV, 2x YC, 1x YUV/YPbPr Component
  
• 1x SDI Input (C2-2205)
  
• Scaling of the RGB or YPbPr input signal
  
• Computer Resolutions to 2048x2048
  
• HDTV Resolutions to 1080p
  
• AutoSet® - Automatic picture sizing
  
• Multiple Worldwide Television Standards
  
• 2x Outputs (RGB or YPbPr) – DVI-D & Analogue
  
• Integral 4x1 Stereo Audio Routing Switcher
  
• RS-232 & IP Interface and Windows Control Panel
  
• IR Remote Control
  
• Variable Image Zoom to 10X and Shrink to 10%
  
• Optional Single/Dual Rackmount Kit
  
• Optional Input Expansion for additional inputs

• Picture-in-Picture
  
• Chromakey and Lumakey
  
• Edge Blending
  
• SDI Input (C2-2255 only)

TV One C2-1200 Up Converter
C2-1200 Video Scaler is based on TV One’s exclusive CORIO2™ technology and provides high quality up conversion from standard video formats to Computer or HDTV signals. NTSC and PAL video standards are supported. Video Inputs are 2x Composite, 2x S-Video or one YUV Component or YPbPr. A computer bypass is also provided. The output is selectable as any computer resolution up to 2048x2048 at any vertical refresh rate and all HDTV resolutions up to 1080p. A wide variety of computer signal formats are available to support PC, Mac and Workstation formats.

All the functions can be controlled via the front panel Push Buttons, an Infrared Control Remote Unit or via an RS-232 connection. A Windows Control Panel is provided and most third party control systems interface directly with the entire C2 range of products. An On-Screen Display is available to assist in setup.

Variable Zoom to 10X allows you to enlarge any part of the video image to fill the entire computer screen and position controls allow you to move around to any area desired. Variable Shrink to as little as 10% allows fitting the image onto most displays. The full bandwidth chroma sampling insures faithfully reproduced, high resolution colours.

A 4x1 integral stereo audio routing switcher provides unbalanced inputs and output to follow the video input selection. A rear panel terminal block provides access. The C2-1200 is housed in a desktop case and a rackmount kit is available as an option.

Key Features:-

• Automatic incoming resolution detection
  
• Inputs: 2x CV, 2x SV 1x YUV/YPbPr Component
  
• Computer Resolutions to 2048x2048
  
• HDTV Resolutions to 1080p
  
• Multiple Worldwide Television Standards
  
• Outputs: 2x RGB or YPbPr
  
• Integral 4x1 Stereo Audio Routing Switcher
  
• RS-232 Interface and Windows Control Panel
  
• IR Remote Control
  
• Variable Image Zoom to 10X and Shrink to 10%
  
• Optional Single/Dual Rackmount Kit
  
• Optional Input Expansion for additional inputs

• Scaling of the RGB or YPbPr input signal
  
• Picture-in-Picture
  
• Chromakey and Lumakey
  
• AutoSet® - Automatic picture sizing

C2-1350 Universal Video Scaler is based on TV One’s exclusive CORIO2™ technology and provides high quality up, down and cross conversion between standard video, computer and HDTV signals. NTSC and PAL standards are supported. Inputs can be Composite Video, S-Video, YUV Component, YPbPr (Progressive Scan) Component or RGB. Our exclusive AutoSet® feature takes the hassle out of setup by automatically sizing and positioning the computer image to fit exactly on the video screen. Signal parameters of the incoming video may be adjusted. All settings are stored in non-volatile memory and are retained even when power is switched off. The high resolution RGB/YPbPr outputs are selectable as any computer resolution up to 2048x2048 at any vertical refresh rate or any HDTV resolution up to 1080p. A wide variety of computer signal formats are available to support PC, Mac and Workstation formats. In the standard resolution mode, simultaneous outputs are available for Composite, S-Video and YUV Component.

All the functions can be controlled via the front panel Push Buttons, an Infrared Control Remote Unit or via an RS-232 connection. A Windows Control Panel is provided and most third party control systems interface directly with the entire C2 range of products. An On-Screen Display is available to assist in setup. Variable Zoom to 10X allows you to enlarge any part of the computer screen to fill the entire video screen and position controls allow you to move around to any area desired. Variable Shrink to as little as 10% allows fitting the image onto most displays. The advanced Digital Flicker Elimination circuitry and high sampling rate insures crisp, clear images, while full bandwidth chroma sampling insures faithfully reproduced, high resolution colours. Motion compensation and a 3:2 Pulldown feature for NTSC greatly improves image quality.

A 4x1 integral stereo audio routing switcher provides unbalanced inputs and output to follow the video input selection. A rear panel terminal block provides access.

Advance features include Genlock, Picture-In-Picture, Chromakey and Lumakey. The Key Mode allows computer graphics to be keyed over an external Composite or S-Video signal. The keyed image may be faded in and out. Due to the 4:4:4 sampling format, precise keying at the pixel level can be achieved. The Mix Mode permits glitch-free mixing between the computer image and external video. The PIP Mode allows either of the computer inputs to be inset in a window over either of the video inputs or visa versa. The PIP window may be placed anywhere on the screen. The Genlock feature insures precise synchronisation of the incoming signals by providing a wide Subcarrier lock range with Subcarrier phase adjustment. The C2-1350 is housed in a desktop case and a rackmount kit is available as an option.

Features:

• Inputs: RGB/YPbPr via HD-15, YUV/YPbPr via 3-BNC, Composite Video via BNC S-Video
  
• All Input Signals are Scalable
  
• Automatic incoming resolution detection
  
• AutoSet® - Automatic picture sizing
  
• Computer Resolutions to 2048x2048
  
• HDTV Resolutions to 1080p
  
• Multiple Worldwide Television Standards
  
• 3:2 Pulldown for NTSC Film Mode
  
• Video signal parameter adjustments
  
• Outputs include: 2x RGB/YUV/YPbPr via HD15 and 5-BNC, Composite via BNC and S-Video
  
• Integral 4x1 Stereo Audio Routing Switcher
  
• RS-232 Interface and Windows Control Panel
  
• IR Remote Control
  
• Variable Image Zoom to 10X and Shrink to 10%
  
• Genlock With Subcarrier Phase Adjustment
  
• Picture-in-Picture
  
• Chromakey and Lumakey
  
• Optional Single/Dual Rackmount Kit
  
• Optional Input Expansion for additional inputs

C2-2300 Universal Video Switcher/Scaler is based on TV One’s exclusive CORIO2™ technology and provides high quality scaling in any direction between standard video, DVI or Analog computer and HDTV signals. NTSC and PAL standards are supported. Input and Outputs can be Composite Video, S-Video, YUV Component, YPbPr (Progressive Scan) Component or RGB. Our exclusive AutoSet® feature takes the hassle out of setup by automatically sizing and positioning the computer image to fit exactly on the video screen. Signal parameters of the incoming video may be adjusted. All settings are stored in non-volatile memory and are retained even when power is switched off. The high resolution RGB/YPbPr outputs are selectable as any computer resolution up to 2048x2048 at any vertical refresh rate or any HDTV resolution up to 1080p. A wide variety of computer signal formats are available to support PC, Mac and Workstation formats.

C2-2355 provides an SDI Output in addition to all of the features of the C2-2350.
All the functions can be controlled via the front panel Push Buttons, an Infrared Control Remote Unit or via an RS-232 or IP connection. A Windows Control Panel is provided and most third party control systems interface directly with the entire C2 range of products. A front panel LCD makes setup easy.

Variable Zoom to 10X allows you to enlarge any part of the computer screen to fill the entire video screen and position controls allow you to move around to any area desired. Variable Shrink to as little as 10% allows fitting the image onto most displays. The advanced Digital Flicker Elimination circuitry and high sampling rate insures crisp, clear images, while full bandwidth chroma sampling insures faithfully reproduced, high resolution colours. Motion compensation and a 3:2 Pulldown feature for NTSC greatly improves image quality.

Features:

• Inputs: DVI RGB/YPbPr, Analog RGB via HD-15, YUV/YPbPr via 3-BNC, C-
• Video via BNC S-Video
  
• All Input Signals are Scalable
  
• Automatic incoming resolution detection
  
• AutoSet® - Automatic picture sizing
  
• Computer Resolutions to 2048x2048
  
• HDTV Resolutions to 1080p
  
• Multiple Worldwide Television Standards
  
• 3:2 Pulldown for NTSC Film Mode
  
• Video signal parameter adjustments
  
• Outputs: DVI RGB/YPbPr, Analog RGB/YUV/ YPbPr via HD-15, C-Video via BNC and S-Video
  
• Integral 4x1 Stereo Audio Routing Switcher
  
• RS-232 & IP Interface w/Windows Control Panel
  
• IR Remote Control
  
• Variable Image Zoom to 10X and Shrink to 10%
  
• Genlock With Subcarrier Phase Adjustment
  
• Picture-in-Picture
  
• Chromakey and Lumakey
  
• Edge Blending
  
• Optional Single/Dual Rackmount Kit
  
• Optional Input Expansion with S2 Switchers
  
• SDI Output (C2-2355)

TV One C2-5100 Universal Video Scaler

Universal Video Scaler with Seamless Switching, PIP, Keying, etc. 9 Inputs and 4 Outputs + 2 Preview. All PAL, SECAM, NTSC Standards
I/O - CV, SV, YCbCr, HDTV and RGBHV (or RGBS or RGsB) up to 2048x2048

TV One C2-5200 Universal Video Scaler

C2-5100 Multi-Video Format Video Processor is much more than a Universal Video Scaler. Often referred to as the Swiss Army Knife of video processors, it has been the benchmark for video image conversion products since its introduction, coming nearer to the ideal of "Anything In - Anything Out" than any other conversion product available. Not only is it a high performance Video Scaler, Up-Converter, Down-Converter and Multi-Format Seamless Switcher, but it goes far beyond that. It's also a Worldwide Standards Converter, Chromkeyer, Lumakeyer, Picture-in-Picture Device, HDTV Converter, Frame Synchroniser, Time Base Corrector, Aspect Ratio Converter and a Universal Image Genlock, just to name a few. The 9-Inputs and 4-Outputs will accommodate Composite Video, S-Video, YCbCr, YPbPr, all HDTV formats and any RGBHV resolution up to 2048x2048 - not just some predefined ones, but ANY resolution, even custom ones. Plus, the C2-5100 also has 2-Outputs for Preview (RGBHV and Composite Video) to facilitate live event switching.

Picture-in-Picture Power - The C2-5100 is an unparalleled P-I-P device in its price range. Any video input can be squeezed and placed into a window of any size and positioned anywhere on the screen. The window can be placed over any other video input as the background. The image in the window can then be seamlessly switched to another video input. The image can also be zoomed while it is in the window. Multiple C2-5100 units may be cascaded to provide layer upon layer and window upon window of images from virtually any source, from Composite Video through HDTV and anything in between.

Powerful Features –The C2-5100 is ideally suited for use with LCD Projectors, CRT Monitors, Projection TV Systems, Plasma or HDTV Displays to improve picture quality. With its output signal format flexibility, it is assured that the Native Resolution of virtually any Digital Display can be matched. Because of the integral resolution calculator, even new resolutions can be instantly added to the menu. Adjustments are provided for Colour Saturation, Hue, Brightness and Contrast and each video input has its own non-volatile memory to retain these settings, even when the power to the unit has been turned off. Integral Test Signals are user defined. A Logo memory is provided, so the unit can easily be used as a Logo Inserter. The C2-5100 employs advanced motion compensation to smooth out fast moving images and its automatic 3:2 Pull-down efficiently de-interlaces video from 24 fps film. The unit can be controlled from the front panel, via RS-232, IR or an optional IP interface.

Features:

• Up / Down Converter
  
• Seamless Switcher
  
• Picture in Picture
  
• SDTV-HDTV, HDTV-HDTV, PC-HDTV & PC-PC Scaler
  
• Frame Synchroniser / Time Base Corrector
  
• Standards Converter
  
• Multi Format Genlock
  
• Windowing Device
  
• Video Transcoder
  
• Logo Inserter
  
• Luma & Chroma Keyer
  
• I/O SDI, CV, S-Video, YUV, YPbPr, RGBHV, RGsB, RGBS
  
• RS-232 Control Interface

• RGB Scaler
  
• Picture in Picture
  
• HDTV-HDTV, PC-HDTV & PC
  
• PC Scaler
  
• RGB Frame Sync
  
• RGB-HDTV Genlock
  
• Aspect Ratio Converter
  
• Luminence & Chromakeyer
  
• Seamless Switcher
  
• Logo Inserter
  
• Windowing Device

C2-7200 Dual Channel Video Processor provides the ultimate flexibility in analog and digital conversion as will as video and computer convergence. It features two independent video processing and scaling engines and two video mixers for maximum flexibility in handling virtually all analog and digital video signals and is equally at home in Broadcast or Display environments. The unit has three basic operating modes to simplify control.

Switcher Mode - Provides equally powerful Program and Preview channels for live event switching. In addition to previewing inputs before selection, even complex functions, such as Chromakeys and Picture-In-Picture, can be previewed for setup, totally independent of the Program channel output. Seamless transitions from Preview to Program can be either by Cut, Variable Duration Cross-Fade or Special Effects. Any signal format can be freely mixed with any other.
Independent Mode - Provides the power of two independently functioning products, performing different tasks in one box. Each output can deliver different formats and resolutions simultaneously. For example, a presentation being fed to a high resolution display on Output 1 via DVI can also be fed to a VCR for recording on Output 2 via Composite Video. In a Broadcast environment, the C2-7200 can function as two completely independent Analog to HD-SDI Converters, each genlocked to a different reference and each with a different logo or ID keyed in.

Dual PIP Mode - Any video input can be squeezed and placed into either of two windows of any size and positioned anywhere on the screen, even overlapping each other with user defined layer priority control. The windows can be placed over any other video input or a static image from the unit’s memory as the background. The image in the window can then be seamlessly switched or cross faded to another video input or even zoomed in or out. Keying can be added independently to each window and the background.

Powerful Features - 4:4:4 sampling provides full bandwidth colour which allows the C2-7200 to provide precise pixel by pixel keying, including Soft (Transparent) Keys. The unit’s 11 Inputs accommodate multiple HD-SDI, SD-SDI, DVI, YPbPr, RGBHV, RGBS, RGsB, YCbCr, Composite and S-Video signals. It handles all HDTV formats and any PC resolution up to 2048x2048 - not just some predefined ones, but ANY resolution, even custom ones. The two independent output channels each offer SDI (SD or HD), DVI-I (also any RGB format), CV and SV simultaneously. The unit’s ability to alter the aspect ratio of any input enables different SDTV and HDTV images to be intermixed in any of the modes.

C2-7200’s output signal format flexibility assures that the Native Resolution of virtually any Digital Display can be matched. Because of the integral resolution calculator, even new resolutions can be instantly added to the menu. Adjustments are provided for Brightness, Contrast, Colour Saturation and Hue (where applicable) and each video input has its own non-volatile memory to retain these settings, even when the power to the unit has been turned off. Integral Test Pattern Signals are user definable. A fast Logo memory is provided, so the unit can easily be used as a Logo Inserter. The C2-7200 employs advanced motion compensation to smooth out fast moving images and its automatic 3:2 Pull-down efficiently de-interlaces video from 24 fps film. The unit can be controlled from the front panel, via RS-232 or via IP by Internet or LAN. The Windows Control Panel provides complete control and adds Macros to facilitate long, complex sequence of commands. One Control Panel can control multiple devices.

Features:

• Dual Independent Scaling Engines
  
• 4:4:4 Sampling for full bandwidth colour
  
• 3x Composite & 3x S-Video Inputs
  
• 2x 10 bit SD/HD-SDI I/O (C2-7200 Only)
  
• 3x DVI Inputs (also handle RGB and YUV)
  
• 2 Independent Multi-Format Outputs
  
• All DVI channels support EDID v1.3
  
• Multiple Conversion & Scaling products in one
  
• Up to 11 Multi-format Inputs – Digital and Analog
  
• RGBHV to 2048x2048
  
• All known HDTV Resolutions
  
• Genlock any Video Input to any other
  
• Seamless Switching with Cuts, Fades or Effects
  
• Unrestricted Dual P-I-P - Any Input over any other
  
• RS-232 & IP Interface for external control
  
• CORIO2® Technology Conversion Engine
  
• Zoom up to 1000% with 100% Pan coverage
  
• Image Shrink to 10% with 100% Pan coverage
  
• AutoSet™ Sizing - Exclusive CORIO Feature
  
• Auto Detect worldwide television standards
  
• Video Processing Controls for Image Adjustment

1. Advice - Our qualified and experienced sales team provide advice based on their many years of experience within the video industry.
    
   
2. Free Support - Our trained support experts provide you with 12 months free Telephone Technical Support on your purchased product. Our support line is a standard national call, not a premium rate call.
    
   
3. Quick Dispatch - 90% of online orders are dispatched within one working day. All orders are dispatched by insured next-working-day delivery services.
    
   
4. Returns Service - Unlike many resellers, Planet PC will deal with returns on your behalf should your product develop a fault. Once you have returned your product to us we will deal with the administration and handle the costs involved with forwarding the product to the appropriate manufacturer (often in the EU), ensuring a return is obtained in a timely fashion and delivering a replacement/your repaired product to you* by an insured delivery service. *Only free if within the U.K. - If outside the U.K. then a delivery charge will be payable when your repaired/replaced product is returned to you.
    
   
5. Training Courses - Planet PC offer a range of video related Training Courses, tailored to your specific needs.
    
   
6. Customer Services - Our prompt and courteous customer support staff are on hand to help with any queries.