The Datavideo DAC-50 is a HD & SD-SDI to Y:U:V Component & Composite Video signal converter with built in up/down scaling. The built in scaler allows users to convert from a HD-SDI (1080i & 720p) or SD-SDI signal to a HD (1080i & 720p) or SD (576/50i) Y:U:V Component or Composite Video signal. The DAC-50 can also cross convert from 1080i to 720p.

The DAC-50 is built in rugged metal housing for use in even the roughest condition.

Key Features:-

• Inputs:
  HD-SDI
  SD-SDI
  
• Outputs:
  Y:U:V Component
  Composite Video
  
• Built in scaler to convert a HD-SDI (1080i / 720p) or SD-SDI signal to a HD (1080i / 720p) or SD (576 50i) Y:U:V Component or Composite signal
  
• Cross convert from 1080i to 720p
  
• Rugged metal housing for use in event the roughest conditions

The DAC-8 is small and intelligent converter for converting HD & SD-SDI to HDMI.

Datavideo's DAC-8 converts from both HD-SDI and SD-SDI to HDMI enabling users to utilise traditional and affordable LCD and Plasma televisions as well as video projectors for broadcast video monitoring.

With the DAC-8 it is now easy to connect HDMI displays to SDI based equipment, simply run a low cost SDI cable from your equipment to the projector or television screen, and let the Datavideo DAC-8 convert the signal into the widely used HDMI connector, it even passes the audio through.

In combination with Datavideo's DAC-9, HDMI to HD/SD-SDI converter, system installers now have a perfect and very affordable solution for distribution HDMI over long distances, without compromising on quality.

Key Features:-

• Small and intelligent converter for converting HD / SD-SDI to HDMI
  
• Use LCD / Plasma TVs and projectors for broadcast video monitoring
  
• SDI embedded audio is passed through
  
• Wide range DV input from 9V to 15V

Datavideo DAC-7 is a small but powerful mini converter that enables users to convert the output from any camera, including prosumer level cameras, to professional HD-SDI or SD-SDI for easy connection to existing professional or broadcast equipment; for example SDI switchers such as Datavideo’s SE-900 or SE-1000.

The DAC-7 can accommodate two channels of audio input via RCA or balanced XLR and embed them both in the SDI signal, requiring only one SDI cable for both video and audio transmission. The DAC-7 is extremely portable, can easily and quickly be mounted between a tripod and a camera, or directly on the camera.

Key Features:-

• Video input:
  1 X CVBS, BNC connector 75 Ohms
  1 X S-Video
  1 X YUV (3 x BNC connectors, 75 Ohms)
  
• Audio input:
  2 x Balance stereo audio, mini-XLR connector
  2 x Unbalanced stereo audio, RCA jack
  
• Output:
  2 x BNC connector, 75 Ohms for SDI signal
  
• Power consumption:
  DC12V, 1.0A

Only professional TV monitors can be switched between PAL and NTSC standards automatically. Recording equipment is always NTSC or PAL, it is extremely rare for any recording device to support both. If you want to provide an NTSC TV series to PAL countries or vice versa, you will need an easy to install, simple to operate and quality PAL / NTSC bi-directional standard converter; the Datavideo STC-100 is just that.

Features:

• PAL and NTSC standard converter, stand alone unit, real time conversion, no need to spend hours capturing footage into a computer
  
• Inputs / Outputs:
  • Component YUV
  • S (YC) Video
  • Composite Video
• Built In TBC
  
• Brightness, Contrast, Colour and Tint Adjustable (Tint NTSC only)
  
• 0 or 7.5 IRE output selectable, may also convert between 0 and 7.5 IRE
  
• Audio level calibration, adjust audio output level

• 3 x 1.2M BNC – BNC Cable
  
• 1 x 1.2M S-Video – S-Video Cable
  
• 12V DC Power Adaptor (100-240V AC input - 12V 1.5 A output)