The Hague Pro-Jib has been designed for use with heavier cameras, to support a maximum weight of 14 kilos. The telescopic counterbalancing arm uses standard bar weights for counterbalance (not supplied). All axis points have radial ball bearings giving an effortlessly smooth vertical crane movement of 2 metres. The Jib is supplied with a 100mm "Bowl type" camera plate which enables you to use your own video head, a 100 to 75mm stepper ring is also supplied should you have a 75mm video head. The Pro-Jib can be used on any 100/75mm "Bowl type" tripod or a Hague Dolly D1/2/7.

Key Features:-

• A traditional boom
  
• Supports up to 14kg.
  
• Telescopic counterbalance arm
  
• Effortlessly smooth crane movement
  
• Fits to a Pro 100/75mm "bowl type" Tripod or a Hague Dolly

The Multi-Jib fastens to any pro-tripod with a 100 or 75mm. bowl or a Hague dolly. It is quick and simple to set up and can be used at three different lengths. At it's standard or short length it will support up to 14kg. and at it's longest length will support up to 9kg. A 100mm. bowl enables you to fasten your video head from your tripod onto the jib, (an optional Stepper Ring is available if you are on the 75mm. bowl system) or a pan & tilt power head can be used for remote operation. Radial ball bearings ensure super smooth crane movement from ground level to almost 4 metres high and pan 360 degrees. Drag can be added to hold the arm at a set position. Standard bar weights can be used as counterbalance or we can supply weights or sand bags as optional extras.

The Multi-Jib breaks down to just 1.2 metres in length making it very easy to handle and will fit in any vehicle. It is suitable for all handheld camcorders, pro-camcorders and will support a maximum weight of 14kg.

Key Features:-

• Choice of three jib lengths*
  
• Quick and simple to set up
  
• Radial ball bearings ensure super smooth crane movement
  
• Fits to a Pro 100/75mm "bowl type" Tripod or a Hague Dolly
  
• The camcorder can move smoothly from ground level to almost 4 metres high & pans 360 degrees

The Hague Handy-jib is great fun to use, you can create crane and tracking shots with ease, its ideal for all lightweight camcorders with flip-out screens.

The Hague Junior Jib fastens directly onto the sturdy stand. It has an adjustable telescopic column with a minimum height of 110cm and a maximum height of 188cm. The column can be locked at the required height and there is a safety pin to prevent the column slipping. It is ideal if you do not have a suitable sturdy tripod to mount the jib on.

Key Features:-

• Supports up to 3kg.
  
• Fits to any sturdy tripod
  
• Quick & simple to set up
  
• Suitable for all handheld camcorders
  
• Tilt control
  
• Jib & Tilt lock
  
• Super smooth crane movement
  
• Supplied with counterbalance weights

The new Hague HDV Boom K8 has been developed to support the new range of HD camcorders such as the Sony Z1, V1, A1 etc. plus all other “handheld” camcorders under 4kg.. The boom is fastened directly to the video head of any sturdy tripod, in the same way you would attach your camcorder, it can be mounted using both 1/4” and 3/8” screws.

Key Features:-

• Supports up to 4kg.
  
• Quick & simple to set up
  
• Suitable for all handheld camcorders
  
• A low cost Boom that fastens to any sturdy tripod
  
• Super smooth crane movement from ground level to over 3.5m. high.
  
• Tilt control - enables the camera to be tilted up and down

The Hague Handy-jib is great fun to use, you can create crane and tracking shots with ease, its ideal for all lightweight camcorders with flip-out screens.

Key Features:-

• A handheld jib with tilt control
  
• Simple & fun to use
  
• Supports up to 1.5kg.
  
• Ideal for mini DV & all lightweight handheld camcorders
  
• Super smooth crane movement from ground level to over 10ft. high

CamCrane K10
The Hague CamCrane K10 is quick and simple to set up, it is supplied with its own Stand and a Remote Pan & Tilt Power Head. The Stand's height is adjustable from 1.1 to 1.4 metres high. Standard bar weights (not supplied) are used for counterbalance, these are held in place by the weight bar and there is an adjustable fine trim weight to obtain perfect balance. Once balanced the camera can smoothly move from ground level to almost 4 metres high and the crane will pan 360 degrees on the stand. You can also pan and tilt the camera on the end of the crane by using the wired remote control.

The distance from the stand to the camera is 2.5 metres and it has a total length of 3.6 metres. It is ideal for all handheld camcorders under 2.5kg. An optional monitor bracket is available, this enables a LCD monitor to be fastened to the crane, making it easier to monitor your shots.

Remote Pan & Tilt Power Head
The electronic motorised Pan & Tilt Power Head is fastened to the end of the Camcrane camera platform by a 1/4" screw.

The unit is battery operated with a wired remote control for both pan & tilt, it also has a variable speed control. It will pan 180 degrees and tilt up or down 15 degrees. We also supply a tilt correction plate which will allow the camera to tilt down 30 degrees from a level position, which is useful when the crane is being used for high shots.

The pan speed is variable between 4 to 8 degrees per second and the tilt is variable between 1.2 to 2.4 degrees per second ( speeds are approximate ). The Power Head is powered by 4 AA batteries. Size 145x115x103mm (5.75x4.5x4 inches)

Includes:

• Camcrane
  
• Fine Trim Weight
  
• Weigh Bar
  
• Remote Pan & Tilt Power Head
  
• Power Head Remote with extension cable

The Hague CamCrane K16DV is quick and simple to set up, it attaches to any 100 or 75mm "bowl type" tripod or can be supplied with a Hague Dolly.

The crane supports up to 4.5kg. and is suitable for all handheld or lightweight "shoulder type" camcorders, it's ideal for the Sony A1, Z1, A1, V1, PD170, VX2100, Canon XL1/2, XM1/2, Panasonic VX100/200.

The CamCrane K16DV breaks down into four parts, making it easier to handle in transit, and you have the choice of using the jib at full length or without the centre section. At its shorter length of 2.15m. the camera will go from ground level to 11ft.6"(3.5m)high, whilst at its full length of 3.25m it will rise to an amazing height of almost 17ft (5.4m) and you can pan the crane 360 Degrees. There is an attachable counterbalance arm, with an adjustable fine trim weight and a weight bar with handgrips. Standard bar weights are used for counterbalance (not supplied). A variable tilt control with lock enables you to tilt the camcorder 90 degrees and the camera can be set in any position, so you can have the camcorder pointing directly downwards or upwards creating some very unusual shots.

Key Features:-

• Supports up to 4.5kg
  
• Quick & simple to set up
  
• Super smooth crane movement
  
• Suitable for all handheld camcorders
  
• Tilt control - tilts the camera up or down
  
• Jib & Tilt lock
  
• Fits to a 100/75mm "bowl type" Tripod or a Hague Dolly