C2-2200 Video Switcher/Scaler is based on TV One’s exclusive CORIO2™ technology and provides high scaling to Analogue or DVI Computer or HDTV signals. NTSC and PAL video standards are supported. Video Inputs are 2x Composite, 2x S-Video and 1x YUV Component or YPbPr. A computer bypass is also provided. RGB/YPbPr Scaling permits the computer input signals to be scaled with the same flexibility as the video inputs. The output is selectable as any computer resolution up to 2048x2048 at any vertical refresh rate and all HDTV resolutions up to 1080p. A wide variety of computer signal formats are available to support PC, Mac and Workstation formats.

C2-2205 All the functions can be controlled via the front panel Push Buttons, an Infrared Control Remote Unit or via an RS-232 or IP connection. A Windows Control Panel is provided and most third party control systems interface directly with the entire C2 range of products. A front panel LCD makes setup easy.

Variable Zoom to 10X allows you to enlarge any part of the video image to fill the entire computer screen and position controls allow you to move around to any area desired. Variable Shrink to as little as 10% allows fitting the image onto most displays. The advanced Digital Flicker Elimination circuitry and high sampling rate insures crisp, clear images, while full bandwidth chroma sampling insures faithfully reproduced, high res colours.

Stereo Audio switching is provided by an integral 4x1 audio routing switcher. The four impedance-independent unbalanced inputs follow the video input selection. A rear panel terminal block provides access.

C2-2250 Video Scaler PLUS has all the functions and features of the C2-2200 and adds a wide variety of additional capabilities, such as Picture-In-Picture, Chromakey, Lumakey and Mixing. The Key Mode allows computer graphics to be keyed over an external Composite or S-Video signal. The keyed image may be faded in and out. Due to the 4:4:4 sampling format, precise keying at the pixel level can be achieved. The Mix Mode permits glitch-free mixing between the computer image and external video. The PIP Mode allows either of the computer inputs to be inset in a window over either of the video inputs or visa versa. The C2-2255 provides an SDI input as well.

Key Features:

• Automatic incoming resolution detection
  
• Analogue Computer Input via HD-15 Connector
  
• DVI-D Computer Input via DVI-I Connector
  
• Inputs: 2x CV, 2x YC, 1x YUV/YPbPr Component
  
• 1x SDI Input (C2-2205)
  
• Scaling of the RGB or YPbPr input signal
  
• Computer Resolutions to 2048x2048
  
• HDTV Resolutions to 1080p
  
• AutoSet® - Automatic picture sizing
  
• Multiple Worldwide Television Standards
  
• 2x Outputs (RGB or YPbPr) – DVI-D & Analogue
  
• Integral 4x1 Stereo Audio Routing Switcher
  
• RS-232 & IP Interface and Windows Control Panel
  
• IR Remote Control
  
• Variable Image Zoom to 10X and Shrink to 10%
  
• Optional Single/Dual Rackmount Kit
  
• Optional Input Expansion for additional inputs

• Picture-in-Picture
  
• Chromakey and Lumakey
  
• Edge Blending
  
• SDI Input (C2-2255 only)