The HD10CEA converts SDI/HD-SDI video with embedded audio to analog video and 4 channel balanced analog audio. SD video outputs can be configured as YPbPr (Betacam or SMPTE/EBU-N10), RGB, composite or YC (S-Video). HD video outputs can be configured as YPbPr or RGB. The analog audio outputs can be wired in a balanced or unbalanced configuration. The 4 audio channels can be selected from group 1-4. Audio and video output connections are available on a 25 pin “D” subminiature connector (breakout cable supplied). All video/audio configuration is done by external dipswitch selection. This versatile, low-cost, miniature monitoring solution also outputs two loop-through SDI/HD-SDI outputs.
Key Features:-
Digital to Analog Audio and Video Converter
SDI/HD-SDI with Embedded Audio Input
SD Component or Composite Video Outputs (SD Input)
HD Component Video Outputs (HD Input)
4 Channel Balanced Audio Output
2 Equalised, Loop-Through SD/HD-SDI Outputs
Selectable Audio Channel Pair/Group
DWP-U Power Supply The DWP-U is an in-line universal input version that can accept a power cord anywhere in the world.
Please Note: Power supply required for this unit
See Adobe Acrobat pdf datasheet (left) for more information.
